AXIS M1034-W Network Camera
System Options
Select the network Security method. All settings must match the settings in the access point. The following security methods are supported, where WPATM-/WPA2TM-Enterprise is more secure than WPA-/WPA2-PSK, which in turn is more secure than WEP:
•WPA-/WPA2–PSK. See page 45.
•WPA-/WPA-Enterprise. See page 45.
•WEP (not recommended). See page 46.
•No security (not recommended). See page 46.
If applicable, select the Network type. Select Master to access the network via an access point or Ad-hocto access any other wireless device and create a local network.
Ad-hoc mode allows users to form a wireless LAN without connection through an access point. The Axis product can, for example, connect point-to-point to an existing ad-hoc network, or if there is none, create one itself. Ad-hoc connection may be useful in certain installations and for troubleshooting but is not the recommended method. The ad-hoc option is only available when supported by the selected security method.
WPATM-/WPA2TM-PSK
The security method WPA-/WPA2–PSKis designed for small networks and does not require an authentication server. The Axis product uses a PSK (Pre-Shared Key) to authenticate with the access point. The key can be entered either as manual hex — a 64 hexdecimal number (0–9, A-F) — or a passphrase using 8–63 ASCII characters. The longer the passphrase, the more secure is the key.
To configure the wireless settings using the WPA-/WPA2–PSK security method:
1.Enter the required Passphrase for the access point.
2.Click Save.
WPATM-/WPA-Enterprise
The security method WPA-/WPA-Enterpriseis designed for large networks and requires an authentication server. The network is protected by EAPOL (Extensible Authentication Protocol Over Lan).
Select the WPA-Enterprise type being used by the access point:
•EAP-TLS. See page 45.
•EAP-PEAP/MSCHAPv2. See page 46.
EAP-TLS
The authentication protocol EAP-TLS(Extensible Authentication Protocol - Transport Layer Security) allows the client and server to authenticate each other using digital certificates provided by a Certification Authority. To gain access to the protected network, the Axis product presents its certificate to the network access point. Access is granted if the certificate is approved.
Important
To ensure successful certificate validation, time synchronization should be performed on all clients and servers prior to configuration.
To configure the wireless settings using the WPATM-/WPA-Enterprise security method and EAP-TLS:
1.Enter the user Identity associated with your certificate.
2.Enter the Private key password for your user identity.
3.Select the EAPOL version (1 or 2) as used in the access point.
4.Click Save.
