AXIS P3367–VE Fixed Dome Network Camera
Hardware overview
Digital Input | 3 | Connect to GND to activate, or leave floating (unconnected) | 0 to +40 V DC |
|
| to deactivate. |
|
|
|
|
|
Digital Output | 4 | Internal connection to ground when activated, floating | Max load =100 mA |
|
| (unconnected) when deactivated. If used with an external | Max voltage = +40 V DC |
|
| relay, a diode must be connected in parallel with the load, for |
|
|
| protection against voltage transients. |
|
|
|
|
|
LED indicators
LED | Color | Indication |
|
|
|
Network | Green | Steady for connection to a 100 MBit/s network. Flashes for network activity. |
| Amber | Steady for connection to a 10 MBit/s network. Flashes for network activity. |
| Unlit | No network connection. |
|
|
|
Status | Green | Steady green for normal operation. |
| Amber | Steady during startup and when restoring settings. |
| Red | Slow flash for failed upgrade. |
|
|
|
Power | Green | Normal operation. |
| Amber | Flashes green/amber during firmware upgrade. |
|
|
|
Note
•The Status LED can be configured to be unlit during normal operation, or to flash only when the product is accessed. To configure, go to Setup > System Options > Ports & Devices > LED. See the online help for more information.
•The Status LED can be configured to flash while an event is active.
•The Status LED can be configured to flash for identifying the unit. This can be done under Setup > System Options >
Maintenance.
6
