Axis Communications Q1614-E Status LED Behavior for Focus Assistant, Buzzer, Lens, Color

Models: Q1614-E

1 71
Download 71 pages 9.71 Kb
Page 10
Image 10
Status LED Behavior for Focus Assistant

AXIS Q1614-E Network Camera

Hardware Overview

Status

Green

Steady green for normal operation.

 

 

 

 

Amber

Steady during startup and when restoring settings.

 

 

 

 

Red

Slow flash for failed upgrade.

 

 

 

Power

Green

Normal operation.

 

 

 

 

Amber

Flashes green/amber during firmware upgrade.

 

 

 

Note

The Status LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options > Ports

&Devices > LED. See the online help for more information.

The Status LED can be configured to flash while an event is active.

The Status LED can be configured to flash for identifying the unit. Go to Setup > System Options > Maintenance .

The Power LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options > Ports

&Devices > LED. See the online help for more information.

The Network LED can be disabled so that it does not flash when there is network traffic. To configure, go to Setup > System Options > Ports & Devices > LED. See the online help for more information.

LED

Color

Indication

 

 

 

 

Housing

Green

Normal operation.

(fan and heater)

 

 

 

Flashing

Single flash:

Heater error

 

 

green

Double flash:

Fan error

 

 

Triple flash:

General error

 

 

Alarm events will be triggered through the camera’s input port.

 

 

Contact your Axis reseller for information about spare parts and troubleshooting.

 

 

 

 

Note

This status LED referred to in the table above is located in the housing.

Status LED Behavior for Focus Assistant

Color

Green

Amber

Red

Indication

Focus Assistant is enabled

The lens is optimally adjusted

The camera has been moved, or an object has been inserted in front of the lens. Exit and restart the Focus Assistant.

The lens is less optimally adjusted.

The camera has been moved, or an object has been inserted in front of the lens. Exit and restart the Focus Assistant.

The lens is poorly adjusted.

Buzzer Signal for Focus Assistant

Buzzer

Fast interval

Medium interval

Slow interval

Lens

Optimally adjusted

Less optimally adjusted

Poorly adjusted

10

Page 10
Image 10
Axis Communications Q1614-E Status LED Behavior for Focus Assistant, Buzzer Signal for Focus Assistant, Lens, Color