LED Indicators | Axis Communications thermal network camera instruction

AXIS Q1931–E Thermal Network Camera

Hardware Overview

•Input/Output (I/O) devices

When connecting external equipment, a multi-connector cable (available from Axis) is required in order to maintain the product’s IP rating. For more information, see Multi-Connector Cable (sold separately), on page 47.

Power Connector

Terminal connector for connecting AC/DC power supply.

SD Card Slot

A microSD card (not included) can be used for local recording with removable storage. For more information, seeTechnical Specifications, on page 53.

NOTICE

To prevent corruption of recordings, the SD card should be unmounted before removal. To unmount, go to Setup > System Options > Storage > SD Card and click Unmount.

Control Button

The control button is used for:

•Resetting the product to factory default settings. See page 46.

•Connecting to an AXIS Video Hosting System service. See page 39. To connect, press and hold the button for about 1 second until the Status LED flashes green.

•Connecting to AXIS Internet Dynamic DNS Service. See page 39. To connect, press and hold the button for about 3 seconds.

LED Indicators

LED	Color	Indication

Status	Unlit	Connection and normal operation

	Amber	Steady during startup. Flashes during firmware upgrade.

	Amber/red	Flashes amber/red if network connection is unavailable or lost.

	Red	Flashes red for firmware upgrade failure.

	Green	Shows steady green for 10 seconds for normal operation after restart.

6

Image 6

Axis Communications thermal network camera LED Indicators, Power Connector, SD Card Slot, Control Button, Color Indication

Contents

Axis Q1931-E Thermal Network Camera Liability About this DocumentLegal Considerations Intellectual Property Rights Support Learn More Table of Contents Axis Q1931-E Thermal Network Camera Audio Connector Connectors and ButtonsNetwork Connector Hardware Overview SD Card Slot LED IndicatorsPower Connector Control Button Access from a Browser Accessing the ProductAccessing the Product Start a browser Internet Explorer, Firefox, Safari Live View Accessing the Product Access from the InternetSet the Root Password Controls on the Live View Manual Trigger Go to Setup EventsAxis Media Control viewer toolbar To show the manual trigger buttons in the Live View Half-duplex mode AMC Audio Controls Media Streams How to Stream H.264Media Streams Axis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be used Accessing Audio Streams Java applet supports simplex audio with G.711 encoding Setting Up the Product Setting Up the ProductBasic Setup Video Stream Video and AudioVideo and Audio Pixel Counter Click Save to apply the new settings Image264 Video and Audio Stream Profiles Camera SettingsExposure Settings Overlay Go to Video & Audio Overlay Image Using Overlay Text in an Action RuleOverlay Image Go to Events Action Rules Audio Modes Audio SettingsPrivacy Mask Audio Input Audio Clips Audio Output Axis Q1931-E Thermal Network Camera Live View Config Live View ConfigDefault Viewer for Browsers User Defined Links Viewer SettingsGo to Setup Live View Config Output Buttons Active/Inactive displays two buttons, one or each action Detectors Set Up Motion Detection WindowsDetectors Motion Detection Audio Detection Motion Detection Parameters Applications Install ApplicationApplications Application Licenses Axis Q1931-E Thermal Network Camera Events Events Setting Up an Action Rule Fallback ActionGo to Events Action Rules and click Add Recipient Use with action Setting Up an Email RecipientEvents Recipients Go to Events Recipients and click Add To create a new schedule SchedulesRecurrences Go to Events Schedules and click Add Recording List RecordingsRecordings Continuous Recording Languages Languages Security System OptionsSystem Options Users Ieee CertificatesGo to System Options Security Ieee Date & Time Go to Setup System Options Security CertificatesClick Install certificate and upload the certificate Audio Support Basic TCP/IP Settings System Options Network DNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service Axis Video Hosting System Avhs Link-Local IPv4 Address NTP ConfigurationHost Name Configuration NAT traversal port mapping for IPv4 QoS Quality of Service FTP RTP/H.264 UPnPTM can be disabled under System Options Network UPnPTMUPnPTM Bonjour Network Share System Options StorageSD Card Go to System Options Storage and click SD Card Ports MaintenancePorts & Devices Port Status System Options Support Advanced Reset to Factory Default Settings Plain ConfigFile Upload Multi-Connector Cable sold separately Multi-Connector Cable sold separatelyFunction Pin Specifications Connector Emergency Recovery Procedure TroubleshootingTroubleshooting Checking the Firmware Symptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Basic Product is accessible locally but not externallyProblems with streaming H.264 Key frames Settings Video and image problems, generalSetup Video & Audio Camera Settings Storage and disk management problems Technical Specifications Technical Specifications Alarm events Function/group Specifications Audio Audio streamingAlarm triggers Installation Performance Considerations Axis Q1931-E Thermal Network Camera M3.4