B&B Electronics 3PXCC2b, 3PXCC1A, 3PXCC1b Click off check mark out of box Use automatic settings

Click off (check mark out of box) Use automatic settings.

			Select Basic Configuration 0007 (or last one).
			Select Input / Output Range.
			Click Change Setting.
Click Resources.			Change Address to match the free address settings you found
			earlier.
			Click OK.
			Select Interrupt Request.
			Click Change Settings.
			Change IRQ to match the free IRQ settings you found earlier.
			At this point you can shut down the system and physically install
			your B&B Electronics Serial Card into an available ISA Slot. Double
			check to make sure the addresses and IRQ’s on the Serial Card are
			set to the correct settings.
Documentation No.3PXCC1x-2x-3903	13	14		Documentation No.3PXCC1x-2x-3903
B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104			B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Comm. Pk – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445			B&B Electronics Ltd – Westlink Comm. Pk – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445