Documentation Number 3PCIOSD1x-3903m Manual Chapter 3 21
B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Comm. Pk. – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445
Windows 2000 Professional This section covers device driver installation for
Windows 2000 Professional.
1. Configure the port on the PCI card to the desired RS-
232/422/485 mode using the jumpers.
2. Install the card in the slot, start the computer as an Administrator
or ask your system administrator to install the software.
3. Windows will detect the PCI card and start Found New
Hardware Wizard to begin driver installation. When installation is
complete, Windows will set the hardware addressing & interrupt
using the drivers and the Plug and Play function of the
Operating System.
4. Installation will install one driver for the PCI Serial card, and a
second driver which is used to assign a Com port to the card.
5. Click Next to continue.
22 Chapter 3 Documentation Number 3PCIOSD1x-3903m Manual
B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Comm. Pk. – Oranmore, Galway, Ireland – Ph 353-91-792444 – Fax 353-91-792445
6. Select Search, Click Next.
7. Insert the driver disk in the Floppy disk drive A: Click Next.