B&B Electronics PESV1A, PES1A manual Connecting the Hardware, Power over Ethernet PoE

Models: PESV1A PES1A

1 60
Download 60 pages 54.71 Kb
Page 18
Image 18

Hardware Overview

Connecting the Hardware

Typically, the PES1A/PESV1A is connected to a network via a hub, switch or router using standard CAT-5 cable. Power must be supplied to the converter via the CAT-5 cable using Power over Ethernet. Configuration is accomplished over the network, or via a direct connection (see below) using the Web Configuration and Management Interface

Power over Ethernet (PoE)

Power is supplied to your PES1A/PESV1A from PoE power source equipment (PSE), which must be installed within 100 meters of the converter. PSEs may be endspan or midspan devices. Endspan PSE devices may be switches or hubs with integrated PoE capability. Midspan PSE devices are dedicated, inline devices that are installed between your network switch and the PES1A/PESV1A.

For more information on PoE see Appendix C.

Endspan PoE

Switch or Hub*

 

 

Serial Cable

 

PES1A

Serial Device

 

 

PC

or

 

PESV1A

 

 

 

* Must be w ithin 100 ft of the PES1A/PESV1A

Figure 6. Connection using Endspan Power Source

8

Manual Documentation Number: PES1A/PESV1A-2907m

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104www.bb-elec.com

B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445www.bb-europe.com

Page 18
Image 18
B&B Electronics PESV1A, PES1A manual Connecting the Hardware, Power over Ethernet PoE