Using the Web Configuration and Management Interface
Advanced Serial Settings
Click the Advanced Serial Settings menu bar to access settings used to fine tune the serial port. Typically these setting will not need to be changed. Consult the
Configuring Alarms and Notification
The PES1A/PESV1A can be configured to generate alarms and send notification emails based on the occurrence of specific events. Events include the states of some
Note: In the PES1A/PESV1A GPIO lines are permanently configured as RS- 232 hardware handshake lines to support the standard
Alarm Notification Settings
The Alarm Notification Settings page provides a checkbox to enable alarm notifications. Text boxes are provided to enter the IP address of your SMTP mail server and the email address that will be placed in the From field of the email.
Alarm Conditions
The Alarm Conditions page is a tabular listing of 32 alarms that can be configured. Table headings include Enable (a checkbox), Alarm name/number, Type of alarm, Trigger conditions, SNMP Trap, Send to address and Email Subject line.
Clicking on the Alarm name opens an Alarm Configuration page for that specific alarm. The page contains two sections: Alarm Conditions and Alarm Destinations.
Alarm Conditions allows you to select
24 | Manual Documentation Number: |
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353
