( G ) UNIT DIRECTLY GOES TO CC.
UNIT DIRECTLY GOES
TO CC
Is Shunt Resistor open OR
Dry Soldered ?
N
Is IC LM324 OK ?
Y
Is Current select Preset
R21 Open ?
N
Is Remote Sense Terminal
Pressed ?
Y
Ensure Remote Sense Switch is Unpressed in Normal Condition.
Y | Replace Shunt Resistor |
| if necessary. |
N | Replace It. |
Y | Replace It. |
1.Check the Shunt Resistor ( 0.025E / 25E ). It might be Open or Dry Soldered.
2.Check IC LM 324. It might be Damaged.
3.Current select Preset R21 might be Open.
6.Remote Sense Terminal might be Pressed on No Load.
22
