B&K 1794 instruction manual Section Specifications

SECTION - 2

SPECIFICATIONS

OUTPUT VOLTAGE	:	0-32V DC continuously variable with coarse
		and fine voltage controls.
LOAD CURRENT	: 0-30 Amp max., continuously variable with
CONSTANT VOLTAGE MODE		coarse and fine controls.
REGULATION
LINE	: Less than ± 0.01% ± 2mV for ±10% change in
		line voltage.
LOAD	:	Less than ± 0.01% ± 2mV for load change from
		zero to full load.
RIPPLE & NOISE	:	Less than 1mV rms max.(20 Hz - 20 MHz)
CONSTANT CURRENT MODE
REGULATION
LINE	: Less than ± 0.05% ±10mA for ±10% change in
		line voltage.
LOAD	: Less than ±0.05% ±10mA for change in output
		voltage from 0 volts to maximum output voltage.
RIPPLE & NOISE	: Less than 6mA rms.
OVERLOAD PROTECTION	: Automatic overload and short circuit protection.
TRANSIENT RESPONSE	: 100µsecs to within 10mV of set output voltage
STABILITY :		for load change from 10% to 90%.
Total drift within 8 hours,after	: ± 0.2% ± 10mV in constant voltage mode.
warm up under constant line,	:	± 0.5% ± 10mA in constant current mode.
load & temp.
PANEL METERS	: Digital panel meters (marked V for voltmeter and
		A for ammeter) are provided with an accuracy of
		± 3 counts.
MODE INDICATION	: Respective LED lights up when the unit is
		working in CV or CC mode.
SET LIMIT/ ON-OFF	: Push Switches for Limit ( V & A ) and output
CONTROLS		ON/OFF setting.
OUTPUT CONTROLS	: Single turn coarse and fine voltage and current
		controls are provided on the front panel
EXTERNAL PROGRAMMING	: Output voltage can be programmed by a variable
		resistance of 5K ( Pot )
OPERATING TEMPERATURE	:	0-40°C.
INPUT VOLTAGE	: 120/230V AC, ± 10% 47 - 63Hz single phase.
DIMENSIONS	: 19"(W ) x 15.75"(D) x 5.24"(H).
WEIGHT	:	50 lbs. Net.

2