Holes each side |
|
| |
TS250 only |
| TA0000C10 | |
(4 Holes) | A1 |
|
|
|
| ||
|
|
| |
|
| BA0236A00 | |
TS130/175 only |
| A1 | |
(4 Holes) |
|
| |
|
|
| |
Several other factors should be carefully evaluated when selecting a location for installation:
1.For effective cooling and maintenance, the system should be mounted on a flat, smooth, noncombustible level surface. A concrete pad is ideal and provides a secure installation.
2.Installation should prevent water levels from reaching the generator. Drainage must be adequate to keep concrete pad free from standing water.
3.Installation should prevent obstructions by buildup of leaves, grass, sand, snow, etc. If these items pose a problem, consider building a small fence or other break to protect the unit from accumulation of debris.
4.Installation should place the generator as close as possible to the transfer switch.
5.At least
6.Access must be provided to allow the enclosure covers to be opened or removed for service and maintenance.
7.Maximum Ambient temperature is 122°F (50°C).
Figure 3-2 Generator Mounting (Skid)
A
B1
B
A2 | A2 | A1 |
A2 | A2 | A1 |
TS25/45/80 only (3 Holes)
TS400 only (6 Holes)
BA0236A02
A2 
A2
27 
24 
21 
48
Table 3-2 Mounting Dimensions
A1
A1
Generator | A | A1 | A2 | B | B1 |
TS25 | 74 | 8.12 | 23.81 | 38 | 36 |
TS35 | 74 | 8.38 | 28.56 | 38 | 36 |
TS45 | 84 | 8.38 | 28.56 | 38 | 36 |
TS60 | 84 | 8.38 | 28.56 | 38 | 36 |
TS80 | 84 | 8.38 | 28.56 | 38 | 36 |
TS130 | 118 | 16.57 | 26.57 | 42 | 40 |
TS175 | 130 | 16.57 | 26.57 | 48 | 46 |
TS250 | 159 | 18.00 | 40.00 | 54 | 52 |
TS400 | 195 | 12.00 | See Figure | 66 | 63 |
Secure the Generator (Skid Mount only)
Six mounting bolts (eight for TS130/175/250) in the base frame secure the generator to the shipping pallet. Remove these bolts, lift the generator and remove the shipping pallet. Secure the generator to the concrete pad using anchor hardware (not provided) in the base frame mounting holes (holes are 0.66” diameter). See Figure
MN2417 |
