6 | U S I N G T H I S G U I D E |
|
This guide explains how to operate your BeoVision MX 4002 using the Beo4 remote control.
In the column to either the far left or right of the page, the operation in question is shown as a sequence of buttons which correspond to the buttons on your Beo4 remote control. This sequence is accompanied by a short instruction.
In most cases, the instructions in the button sequences are supported by illustrations of the menus on the TV screen.
The operation in question is described in the main text.
The remarks e.g. ‘Note:…’; which are differentiated from the main text have various functions which include:
•Troubleshooting; describing specific circumstances which may occur during an operation
•Providing additional information, such as detailed information about the contents of the menus
•Informing about procedures which may need to be fulfilled before an operation is commenced.
TV Switch on the TV
then
MENU Call up the Main menu
Press repeatedly to light up Setup in red
then
GO Press to call up the Setup menu
The Setup menu appears, then...
Example of a sequence of buttons
|
|
|
|
|
|
| Freq | Fine | System | Decoder |
|
| 210 | +1 | B/G | Off |
|
|
|
|
|
|
|
|
|
|
|
|
|
Example of a fill-in menu
The first item in the MX 4002 Setup menu, Tuning, calls up the menu which enables you to tune in to TV stations and store them on program numbers of your own choice. …
Example of a Main text
Note: See the next page for further Information about the items in the tuning menu. …
