Baracoda 1500 owner manual Troubleshooting, Please call, Problem, Solution

Models: 1500

1 12
Download 12 pages 52.15 Kb
Page 10
Image 10
TROUBLESHOOTING

TROUBLESHOOTING

If you experience a problem with your Zodiac 1500, please review the installation section and ensure all steps have been followed correctly.

 

PROBLEM

SOLUTION

 

 

 

 

1. Machine does not move, or moves sluggishly.

• Confirm that the main drain is closed, if you have one.

 

 

• Backwash filter and empty pump basket.

 

 

• Check diaphragm for damage or wear

 

 

(see Quick Access Cassette System).

 

 

• Check for air in system. If water level in pump

 

 

basket drops or you notice excessive air bubbles in

 

 

pump basket or coming from jets, you have air in the

 

 

system. Check hose connections, tighten all fittings at

 

 

pump, check gasket in pump basket for wear.

 

 

• Increase flow by adjusting FlowKeeper valve to higher

 

 

setting.

 

 

Note: In water 600 F or less, it may be necessary to

 

 

increase flow to compensate for the reduced flexibility

 

 

of the hose and diaphragm. To increase flow, adjust

 

 

FlowKeeper Valve to higher setting.

 

 

 

 

2. Machine does not cover entire pool.

• Point return jets as far down as possible.

 

 

• Make sure hose does not have memory from

 

 

being coiled (see Care and Maintenance).

 

 

• Confirm proper hose length.

 

 

• Increase setting on FlowKeeper Valve if necessary.

 

 

 

 

3. Machine sticks on ladder.

• Decrease setting on FlowKeeper Valve to lower flow

 

 

and to bring the cleaner off the wall.

 

 

• Remove ladder if possible.

 

 

• Install large wheel deflector. (see Zodiac Accessories)

 

 

 

 

4. Machine sticks in steps.

• Ensure correct amount of hose is being used

 

 

(see Assembly). Shorten if necessary.

 

 

• Reduce setting on the FlowKeeper Valve.

 

 

• Install large wheel deflector.

 

 

 

 

5. Machine stays on walls or edge of pool.

• Reduce setting on the FlowKeeper Valve.

 

 

 

 

6. Machine won’t climb walls.

• Increase flow by adjusting FlowKeeper Valve to

 

 

higher setting.

 

 

 

If this unit is not working properly, do not return it to your dealer.

Please call 1-888-647-4004.

IMPORTANT: If your Zodiac 1500 gets stuck in your pool, please remove the unit and immediately contact ZODIAC POOL CARE CANADA, LTD. at 1-888-647-4004.

10

Page 10
Image 10
Baracoda 1500 Troubleshooting, If this unit is not working properly, do not return it to your dealer, Please call, Problem