Baracoda HOW YOUR ZODIAC 1500 WORKS, Prepare The Pool And Filtration System, Before Adjustment

Models: 1500

1 12
Download 12 pages 52.15 Kb
Page 4
Image 4
HOW YOUR ZODIAC 1500™ WORKS

HOW YOUR ZODIAC 1500™ WORKS

Your pool pump pulls water from the skimmer through a strainer basket, then pushes the water through the filter system and back into the pool through the return inlet.

The Zodiac Automatic Pool Cleaner connects to the skimmer or dedicated vacuum line with the attachments provided. Water flows through the diaphragm of the cleaner at a rate of 14 to 19 gallons per minute.

Diverting or re-directing the return inlets downward breaks up the circulation pattern of water within the pool. This allows random cleaning around the pool.

Most common problems can be eliminated by reading through the entire manual before installing your new Zodiac 1500.

PREPARE THE POOL AND FILTRATION SYSTEM

Manually vacuum your pool if excessive debris is present. This eliminates unnecessary adjustment later.

Backwash or clean the filter according to the manufacturer's instructions.

Clean the skimmer basket and the pump strainer basket.

Divert the pool return inlet downward to the bottom of the pool.

Note: If your pool is equipped with a main drain, turn it off.

GENERAL POOL SCHEMATIC

SKIMMER

 

RETURN

IMPORTANT!

FLOW

INLET

 

Return flow must be

POOL

 

directed toward pool

 

bottom as shown.

FILTER

 

 

PUMP

 

Diverting the pool return inlets downward allows the Zodiac 1500 to move randomly throughout the pool. Loosen the lock ring on the return inlet, aim the eyeball straight downward and tighten the lock ring.

BEFORE ADJUSTMENT

4

SIDE VIEW

TOP VIEW

AFTER ADJUSTMENT

SIDE VIEW

TOP VIEW

Page 4
Image 4
Baracoda HOW YOUR ZODIAC 1500 WORKS, Prepare The Pool And Filtration System, General Pool Schematic, Before Adjustment