båÅçêÉ=smñ=fåëí~ää~íáçå=dìáÇÉ
Installation
fåëí~ääáåÖ=smu=áå=~=táÇÉ=pÅêÉÉå=`çåÑáÖìê~íáçå
The figure below illustrates a block diagram of a “triple” wide screen configuration that includes VPx. Use this diagram for reference in the following procedure. Please note:
•
•
Aux destinations are not shown in the diagram.
This procedure can be used for wide screen configurations consisting of from 2 to 32 screens. Horizontal, vertical, and “array” blending is set using the Destination Setup Menu.
•A VP must be used as the “master” processor. Thereafter, either a VP or a VPx can be used.
•Software version 1.22 (or higher) must be installed first in your Encore Controller, prior to connecting your VPx processor(s).
Program #1
Program #2
Program #3
Projector #1 | Projector #2 | Projector #3 |
Preview #1
Preview #2
Preview #3
M/E Inputs | VP #1 | Note: | #1 is VP only, not VPx |
| |||
Scaled |
|
|
|
Sources |
|
| PG 2 |
Unscaled |
|
| PVW |
|
|
| |
Sources |
|
| PG 1 |
VP or VPx #2 | Program | Source |
Link | Link | |
|
| PG 2 |
Unscaled |
| PVW |
|
| |
Sources |
| PG 1 |
VP or VPx #3 | Program | Source |
Link | Link |
| PG 2 |
Unscaled | PVW |
| |
Sources | PG 1 |
Important: Software version 1.22 (or higher) must be installed in the Controller.
To:
Routers 
|
| Ethernet Switch |
| Controller SC or LC | |
|
| ||||
ImagePRO |
|
|
| ||
|
|
|
|
|
Figure 5. Block Diagram, Wide Screen Encore Configuration
Encore VPx Installation Guide • |
| 17 |
|
