94 MatrixPRO • 8x8 DVI Router • User’s Guide

_K==oÉãçíÉ=`çåíêçä=mêçíçÅçä

MatrixPRO Remote Commands

j~íêáñmol=oÉãçíÉ=`çãã~åÇë

The table below lists MatrixPRO 8x8 DVI Router remote commands.

Table B-2. MatrixPRO 8x8 DVI Router Remote Commands

Command Description Page

CLEAR Clear all matrix video routings 95
DHCP Enable/disable DHCP mode 95
FPLOCK en Lock/unlock the front panel from user input 95
GCLEAR grp Clears grouping information for the specified group 95
GADD grp out in Add an output and/or input to the selected group 95
GDEL grp out in Remove output and/or input from the selected group. 96
IP Set or update IP Address 96
IPINFO Provides information regarding Ethernet 96
LOADR Places unit into loader mode for field upgrades 96
MPRC Remote panel communication, begin command 96
OSTAT Show output status 96
NSTAT Send the number of inputs and outputs 97
PRST num Saves current front panel configuration/routing to a Preset location 97
PSTAT Displays preset information 97
RESET Resets the system 97
REV MatrixPRO board revision and main software version information 97
RGBMUTE Mutes the output channel, syncs remain 98
RPRST num Recall an existing preset 98
RTEMP out in Routes inputs to outputs (pend) 98
SPARAMS Set serial settings - baud rate 98
TAKE e n Activate or cancel all pending video/audio routes. 98
TPAT Selects test pattern 99
WHOAREYOU Query identity of this serial/ethernet connection 99
HELP Displays a list of available commands 99
?Display specific command plus parameter description 99