Barco 26-0503000-00 manual Pí~íìë=jÉåì, Input Status Output Status

4. Operation

Using the Main Menu

pí~íìë=jÉåì

From the Main Menu, select Status to display the Status Menu:

INPUT STATUS
-	3	T	-	7	7
1	2	3	4	5	6

OUTPUT STATUS

Figure 4-11.MatrixPRO Status Menu (sample)

This menu shows all current input-to-output assignments (or “routes”). Any input can be routed to any combination of the 8 outputs. Please note:

•When you first display the Status Menu, the lowest 6 of the 8 input/output assignments are shown.

•Use the ADJUST knob to scroll through the input/output display.

~Turn the knob clockwise (CW) to scroll the display down the list of assignments.

~Turn the knob counter-clockwise (CCW) to scroll the display up the list of assignments.

•The display updates in real time whenever a new route is performed (when the TAKE button is pressed).

•On the menu:

~Numbers on the lower OUTPUT STATUS line are fixed, and do not change. These numbers represent the 8 output channels.

~Numbers on the upper INPUT STATUS line show the input that is routed to the output listed directly below.

~The label “T” indicates that a Test Pattern is routed to the selected output.

~The label “B” indicates that RGB Mute is enabled for the selected output.

~The label “-” indicates that the selected output is blanked. This output is inactive.

40 MatrixPRO • 8x8 DVI Router • User’s Guide