Manuals / Barco / Power Tools / Saw

Barco 26-0503000-00 manual QêçìÄäÉëÜççíáåÖ=bíÜÉêåÉí=`çããìåáÅ~íáçå

Models: 26-0503000-00

1 108
Download 108 pages 8.46 Kb
Page 83
Image 83

6. Upgrading Software

Ethernet Upgrade Method

8.In the dialog, enter MatrixPRO’s IP address (as noted in step 5 above), and enter the default port number: 23.

9.Click the Connect button. If the connection is successfully, the message

“Connect via Ethernet successful” appears in the Flash Loader’s Status Bar. If you cannot connect, refer to the “Troubleshooting Ethernet Communication” section on page 83.

10.To upload files to MatrixPRO, click "Open script file to read and upload."

11.In the dialog, select "Complete_Load.sld" and click Open. The MatrixPRO menu should immediately display the "System in LOADER MODE" message.

12.It takes several minutes to load the flash memory. When complete, the Flash Loader utility displays the “Upload Complete” message. Click OK to continue.

13.Cycle power on the MatrixPRO, and exit the Flash Loader utility.

14.On MatrixPRO, perform a factory reset. In Chapter 4, refer to the “Factory Reset Menu” section on page 39 for instructions.

15.On MatrixPRO, verify that the new software has been loaded correctly. In Chapter 4, refer to the “Tech Support Menu” section on page 39 for instructions.

qêçìÄäÉëÜççíáåÖ=bíÜÉêåÉí=`çããìåáÅ~íáçå

„Use the following steps to determine the IP address of MatrixPRO, and establish proper communications:

Note

The default IP address is 192.168.000.243.

1.Turn on the MatrixPRO router and navigate to the IP Address Menu. In Chapter 4, refer to the “IP Address” section on page 37 for instructions.

2.Make a note of MatrixPRO’s IP address — if DHCP is enabled on MatrixPRO, its IP address may not be the default value.

3.Attempt to ping the router as follows:

a.Connect MatrixPRO’s Ethernet port to a Hub or Switch.

b.Connect the Ethernet Hub or Switch to your PC. A totally “local” network is recommended, without IP connections to the outside world.

c.Turn on the PC or laptop.

d.Open a command prompt window on the PC. Click Start > Programs > Accessories > Command Prompt.

e.On the command prompt line, type: ping 192.168.0.243

... followed by Enter.

Note

Use the unit’s actual IP address, as determined in step 2

 

above.

 

 

f.If the computer is able to successfully communicate with the MatrixPRO, you will see a series of “replies” from the target IP address. Repeat the upgrade procedure as outlined in the “Ethernet Upgrade Method” section on page 82.

MatrixPRO • 8x8 DVI Router • User’s Guide

 

83

 

Page 82 Page 84
Page 83
Image 83
Barco 26-0503000-00 manual QêçìÄäÉëÜççíáåÖ=bíÜÉêåÉí=`çããìåáÅ~íáçå
Page 82 Page 84

26-0503000-00 specifications

The Barco 26-0503000-00 is a high-performance imaging solution designed primarily for medical applications, such as surgical theaters and diagnostic imaging. Known for its advanced technology, this display system enhances visualization and contributes significantly to the efficiency and effectiveness of medical professionals in various settings.

One of the standout features of the Barco 26-0503000-00 is its superior image quality. With a resolution of 2560 x 1600 pixels, the display provides exceptional clarity and detail, making it easier for surgeons and clinicians to analyze intricate anatomical structures. The display’s high pixel density ensures that images maintain their fidelity even when zoomed in, which is crucial during surgical interventions and diagnostic evaluations.

Equipped with advanced LED technology, the Barco display offers superior brightness and contrast ratios, resulting in vivid and realistic color reproduction. This capability is particularly important in medical imaging, where accurate color representation can be vital for diagnosis and treatment planning. The monitor also features a wide color gamut, enabling it to reproduce a diverse range of colors, ensuring all details are visible without distortion.

Another key characteristic of the Barco 26-0503000-00 is its ergonomic design. The display is often designed to reduce eye strain and enhance comfort during prolonged use. With adjustable height, tilt, and rotation, healthcare professionals can position the monitor to suit their workflow, thereby improving productivity and minimizing potential physical discomfort.

In terms of connectivity, this model supports various interfaces, including DisplayPort and HDMI, ensuring compatibility with a wide range of imaging devices. This flexibility allows for seamless integration into existing medical systems, making it an efficient choice for healthcare facilities looking to upgrade their imaging technology without significant disruptions.

Furthermore, the Barco 26-0503000-00 is built with durability in mind, featuring a robust design that can withstand the demanding environments often found in hospitals and surgical centers. The monitor is also compliant with relevant medical standards, ensuring that it meets the rigorous requirements needed for medical applications.

In summary, the Barco 26-0503000-00 is an exceptional imaging display that combines high resolution, advanced LED technology, ergonomic features, and robust connectivity options. It serves as a critical asset in medical environments, enhancing the quality of care through improved image clarity and usability for healthcare professionals.