Barco 26-0503000-00 manual ~íêáñmol=UñU=asf=oçìíÉê=oÉ~ê=m~åÉä, DVI Input Connectors, Serial Port

2. Hardware Orientation

MatrixPRO 8x8 DVI Router Rear Panel

j~íêáñmol=UñU=asf=oçìíÉê=oÉ~ê=m~åÉä

The figure below illustrates the MatrixPRO 8x8 DVI Router rear panel:

							3	5
							SERIAL
		INPUTS			OUTPUTS		ETHERNET
5	6	7	8	5	6	7	8
1	2	3	4	1	2	3	4
								100-240 V	50-60 Hz
								3.0 A
		1			2		4
		Figure 2-1.MatrixPRO 8x8 DVI Router Rear Panel

1)	DVI Input Connectors	4)	Ethernet Port
2)	DVI Output Connectors	5)	AC Connector
3)	Serial Port

Following are descriptions of each rear panel connector:

1)DVI Input Connectors

Eight DVI input connectors are provided. Each connector has an associated LED that lights green to indicate the presence of a valid video signal.

~In Appendix A, refer to the “Input Specifications” section on page 86 for input video details.

~In Appendix A, refer to the “DVI Connector” section on page 88 for pinout specifications.

2)DVI Output Connectors

Eight DVI output connectors are provided.

~In Appendix A, refer to the “Output Specifications” section on page 86 for output video details.

~In Appendix A, refer to the “DVI Connector” section on page 88 for pinout specifications.

3)Serial Port

One 9-pin D connector is provided for RS-232 serial communications with the MatrixPRO 8x8 DVI Router chassis and for downloading code in the field. In Appendix A, refer to the “Serial Connector” section on page 90 for pinouts.

4)Ethernet Port

One RJ-45 connector is provided for 10/100BaseT Ethernet communications with the MatrixPRO 8x8 DVI Router chassis. When (optionally) connecting the router to an Encore or remote control panel, a standard Ethernet hub or switch on an isolated network is recommended.

MatrixPRO • 8x8 DVI Router • User’s Guide 21