| SMA200 Manual V1.0 |
4.COM-EXPRESS CONNECTOR DESCRIPTION
4.1.Signal Terminology Descriptions
Signal | Description |
PU | Internally implemented pull up resistor |
PD | Internally implemented pull down resistor |
I/O 3.3V | |
I/O 5V | |
I 3V | Input 3.3V tolerant |
I 5V | Input 5V tolerant |
I/O 3.3VSB | Input 3.3V tolerant, active in standby state |
O 3V | Output 3.3V signal level |
O 5V | Output 5V signal level |
P | Power input/output |
D | Differential signal pair |
DDC | Display data channel |
PCIE | In compliance with PCI Express Base Specification, Revision 1.0a |
SATA | In compliance with Serial ATA Specification, Revision 1.0a |
LVDS | Low voltage differential signal: 350mV nominal; 450mV maximum differential signal |
LAN | 100/10Mbit/s LAN signals coming from the PHY |
TPM | Trusted platform module |
1GB LAN signals |
20
