92 MatrixPRO • 8x8 DVI Router • User’s Guide
_K==oÉãçíÉ=`çåíêçä=mêçíçÅçä
Default Serial Parameters
aÉÑ~ìäí=pÉêá~ä=m~ê~ãÉíÉêëThe following are the parameter settings for serial communication:
•Baud Rate = 115K baud
•Parity = NONE
•Stop Bit = 1
•Data Bit = 8
•Echo = ON
•Flow Control = NONE
aÉÑ~ìäí=fm=^ÇÇêÉëëThe MatrixPRO default IP address is 192.168.000.243.
Please note:
•The system returns to this value after a factory reset.
•This default address can be changed using the menu system. In Chapter 4, refer
to the “IP Address” section on page37 for instructions.
Note These are the default settings, but only the baud rate can be
changed serially, or using the menu. In Chapter4, refer to the
“RS-232 Settings Menu” section on page37 for instructions.