Thisdevice complies with Part 15 of the FCC Rules. Operationis subject to the following two conditions:
1. thisdev ice may not cause harmful interference, and
2. thisdevice must accept any interference received, including interference that may cause undesired operation of the device.
FCC RF Radiation Exposure Statement: This device is capable of operating in 802.11a mode. For 802.11a devices operating in the
frequencyrange of 5.15 - 5.25 GHz, they are restricted for indoor operations to reduce any potential harmful interference for Mobile Satellite
Services(MSS) in the US. WIFI Access Points that are capable of allowing your device to operate in 802.11amode (5 .15 - 5.25 GHz band)
areoptimized for indoor use only. Ifyour WIFI network is capable of operating in this mode, please restrict your WIFI use indoors to not
violatefederal regulations to protect Mobile Satellite Services.
Base Unit FFC ID: RYK-WPEA-121N
Button FCC ID: 2AAED-CLSBTN
Compliance Anatel (Brasil)
1. Esteproduto está homologado pela Anatel, de acordo com os procedimentos regulamentados pela Resolução nº 242/2000, e atende
aos requisitos técnicos aplicados, incluindo os limites de exposição da taxa de absorção específica referentea ca mpos elétricos,
magnéticose eletromagnéticos de radiofreqüência de acordo com as resoluções nº 303/2002 e 533/2009. Para maiores informações,
consulte o siteda Anatel - www.ana tel.gov.br
2. Esteequipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações
dom esmo tipo, e não pode causar interferênciaa sistemas operando em caráter primário.
Canada, Industry Canada (IC) Notices
Thisdevice complies with Industry Canada licence-exempt RSS standard(s). Operationis subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Radio Frequency (RF) Exposure Information
The radiated output power of the Barco Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Barco
WirelessDevice should be used in such a manner such that the potential for human contact during normal operation is minimized.
Base Unit IC ID: IC: 4104 A-AR5BHB116
Button IC ID: 9393B-CLSBTN
IC Antenna statement
Under Industry Canada regulations, this radiot ransmittermay only operate using an antenna of a type and maximum (or lesser) gain
approvedfor the transmitter by Industry Canada. To reduce potential radio interference toother users, the antenna type and its gain should
beso chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
This radio transmitter 4104 A-AR5BHB116has been approved by Industry Canada to operate with the antenna types listed below with
themaximum perm issiblegain and required antenna impedance for each antenna type indicated. Antenna typesnot included in this list,
havinga gain greater than the max imum gain indicated for that type, are strictlyprohibited for use with this device.
Type: Dipole
Maximum Peak Gain: 2 dBi
Impedance: 50 Ohm
Canada, avis d’lndustry Canada (IC)
Le présent appareil est conforme aux CNR d’IndustrieCanada applicables aux appareils radio exempts de licence. L’exploitation est
autoriséeaux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout
brouillageradioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Informations concernant l’exposition aux fréquences radio(RF)
Lapuissance de sortie émise par l’appareil de s ans fil Barco est inférieureà la limite d’exposition aux fréquences radio d’Industry Canada
(IC).Utilisez l’appareil de sans fil Barco de façon à m inimiser les contacts humains lors du fonctionnement normal.
IC ID Unitéde Bas e: 4104 A-AR5BHB116
IC ID Button : 9393B-CLSBTN