3. Getting Started
3. GETTING STARTED
Overview
• Powering the Base Unit on and off
•BasicUse
• Advanced Use
• Use of an iOS device with ClickShare Link
• User Interface
• Capture mode
• Shared desktop: primary - extended
•Audioconfiguration
• Pairing

3.1 Powering the Base Unit on and off

About power mode

Youcan power on and off the Base Unit and bring the system in standby mode. In standby mode the system mutes the output signal
tothe display. Ifyour display s upportsthis, itwill automatically enter power saving mode.

Topower on the Base Unit or awake it from standby

1. When the Base Unit is shut down, set the rocker switch at the back of the Base Unit to “I”.
Refer to image 3-1.
Image3-1
Rockerswitch
2. If the system does not start up automatically, push the standby button shortly.
Refer to image 3-2.
R5900001 CLICKSHARE 21/11/2013 11