3. Getting Started
Yourcontent is shown full screen on the display. If otherpers onswere s haringtheir content on the display, their screens are
removed. Their Button’s LEDs are now shining white again.
user 5
5
4 users
4
12
3
Image3-13
Singledisplay
user 5
55
4 users
12 34
Image3-14
Dualdisplay
21 34 5
Image3-15
Panoramicdisplay
When you click again, your content is removed and the Base Unit shows the welcome screen again. The
contentof the previous users is not restored on the display.

3.4 Use of an iOS device with ClickShare Link

About using an iOS device with ClickShare Link

Thecontent of the iOS device touchscreen can be displayed on the large meeting room display(s) as one of the possible sources.
Theoptional ClickShare Link must be installed in the meeting room before an iO S device can participate by sharing its screen con-
tent. For more information about the physicalinstallation of ClickShare Link in combination with an iOS device, consult ClickShare’s
installationguide (R59000 04)

Necessary parts

a ClickShare Link
an HDMI cable
optional: an iOS device HDMI adapter or an Apple TV

Connection with cable

1. Connect the iOS device HDMI convertor to your iOS device.
2. Connect the ClickShare Link to the power and to a rear USB port of the Base Unit.
3. Connect the HDMI port of the iO S device to the input of the ClickShare Link.
The content of the screen will be displayed on the meeting room screen.
R5900001 CLICKSHARE 21/11/2013 17