Color Menu

- (Down) + (Up) Auto Balance

	Red	68
	Green	65
	Blue	70
	Main Menu	>
	A1 1024 x 768 - 60.1	48.4k

**To unlock the Controls, proceed as follows:

1Press the Power key to switch off the display

2With one hand, press and hold the <+> and the <-> key at the same time.

With the other hand, press the Power key shortly to switch the display on again.

3Keep holding the <+> and the <-> key for about 3 seconds.

4At last, release the <+> and the <-> key. Now, by pressing the Menu key, the OSD menu will appear.

Note:

The bottom line of the OSD shows the input type, current resolution of the monitor and status of vertical sync. If it shows user mode, one of the user modes is selected.

Function	Description
Auto Balance	To automatically adjust the contrast
	level of RGB. This does not support
	resolution of Mac 832 x 624 at 75Hz.

R	To adjust the level of color Red.

G	To adjust the level of color Green.

B	To adjust the level of color Blue.

Main Menu	To return to Main Menu.

MFCD 1219 (TS) User's Guide

Barco MCFD 1219 - MCFD 1219 TS user manual Color Menu

Models: MCFD 1219 - MCFD 1219 TS

Color Menu