Control panel
1)ON/OFF button
2)Delay start button
3)Power on indicator
4)Delay start indicators
5)Salt and rinse aid indicators
6)Program indicators
7)Program button
Using your dishwasher
Before first use
oInstall the appliance as per the installation instructions contained within this booklet.
oFill the water softener with 1 litre of tap water and then fill with specialist dishwasher salt. After this you should set the water softener level.
oFill the rinse aid dispenser and then set the rinse aid dosage.
Filling with dishwasher salt
IMPORTANT: You should only use salt that is specially designed for use in a dishwasher. If any other type of salt is used in the appliance (in particular table salt), it will damage the water softener.
oIdeally you should fill the water softener with salt, just before you are about to run a wash program. This will help to clear any salt that may have overflowed from the water softener during the salt filling process.
oOpen the door of the dishwasher and then remove the lower basket. The basket should be empty when you remove it.
oTurn the water softener cap anticlockwise and remove it.
oPour 1 litre of water into the water softener.
11
