Baumatic BDWI640 manual Securing the dishwasher

Securing the dishwasher

The dishwasher must be secured to the worktop, this can be done in one of two ways:-

o Standard worktop- Secure the dishwasher to the underside of the worktop by using two wood screws (A).

oYou should screw through the holes in the brackets at the top of the dishwasher cabinet.

oThese screws should be fully tightened.

oMarble/granite worktop- The material of the worktop will mean that it is impossible to put a screw through the underneath of the worktop.

oOn either side of the front edge of the dishwasher cabinet, there is a rubber stopper. You should remove the rubber stoppers, to reveal a pre-drilled hole on either side of the dishwasher.

oSecure the dishwasher to the cupboard either side of it, by screwing a wood screw through the pre-drilled holes into the cupboards. These screws should be fully tightened (B).

o The rubber stoppers should then be refitted into their original position.

43