![](/images/new-backgrounds/1284602/28460255x1.webp)
Cleaning the filters
For best performance and results, the entire filter assembly should be thoroughly cleaned regularly (ideally after each wash cycle).
1.Turn the coarse filter
2.Pull out the main filter and rinse this under the tap to remove any food debris that is trapped in it.
3.Pull out the fine filter and rinse this under the tap to remove any food debris that is trapped in it.
4.Place the fine filter back in its original position.
5.Place the main and coarse filter back into their original positions in the base of the dishwasher. You must turn the coarse filter clockwise to lock it back into position.
IMPORTANT: If a glass gets smashed inside of the appliance, you must check there is no glass in the filter before the machine is used again as this can cause a drainage failure.
IMPORTANT: THE DISHWASHER SHOULD NEVER BE SET ON A WASH CYCLE WITHOUT THE FILTERS BEING INSIDE OF THE APPLIANCE.
28