oPlace the end of the drain hose on your drain pipe. Push it a short way down into your drain pipe. The drain pipe must have a minimum diameter of 40 mm.
oThe top of the drain hose must be no higher than 1000 mm.
oIMPORTANT: Do not insert the drain hose too deeply into the pipe, as this may cause siphoning.
oNEVER EXTEND THE DRAINAGE HOSE FROM ITS ORIGINAL LENGTH.
Connecting to the power supply
oIMPORTANT: The electrical socket must still be accessible once the appliance is installed.
oConsult the rating plate, located on the right hand side of the drop down door BEFORE making the electrical connections. Ensure that the voltage reaching the plug is the same as that on the rating plate.
o DO NOT REMOVE THE RATING PLATE AS THE
INFORMATION ON IT IS IMPORTANT.
oThe moulded plug that is supplied with the appliance must be placed into an earthed and insulated socket.
oBroken or damaged power leads must only be replaced by a suitably qualified person. A power lead of a similar type must be used in replacement.
oPower lead type – H 0 V V – F 3G 1,5.
o IMPORTANT: We do not recommend that this appliance is connected to an extension lead.
40
