Cleaning the spray arms
The spray arms should be cleaned regularly, to prevent hard water deposits from clogging the spray arm jets and bearings.
oTo remove the upper spray arm, hold the nut and rotate the arm clockwise to remove it.
oTo remove the lower spray arm, gently pull it upwards.
oWash the spray arms in warm, soapy water and use a soft brush to clean the jets.
oRinse the spray arms thoroughly and then reassemble the spray arms back in their original positions.
Cleaning the control panel
IMPORTANT: Do not use any abrasive cleaner or household polish on either the control panel or operating parts.
oWipe over the control panel using a brand new damp cloth with warm water.
29
