Gently rock the control bottle before opening to ensure it is mixed well. Squeeze a small drop of control solution on a clean nonabsorbent surface (such as a piece of wax paper). Do not apply control solution to the test strip directly from the bottle.
Immediately touch the tip of the test strip to the drop of control solution. The solution is pulled into the test strip through the tip.
Hold it in the drop until the meter beeps.
After the beep, you will see the meter countdown five seconds until the test is complete and your control test result is displayed.
The meter will automatically recognize and mark 
the control result for you.
NOTE: The 
does not indicate the control test result is within the specified range.
Help
Control Solution Testing
www.ascensia.co.uk19
