![](/images/new-backgrounds/1256707/25670757x1.webp)
The Alarm:
When the alarm sounds, the meter will automati- cally turn on, the alarm will sound 20 times, and the display will show the
You can now run another test
by placing a test strip in the test strip port and following the
testing instructions (page 8).
When you have completed this test and the result is shown on the display, you may want to
mark this test with the to identify this test result as your
If you do not want to run another test immediately after the alarm sounds, press any button to turn your meter off.
The meter will only set one alarm. It will remember the last alarm set. Any previous alarm setting will be lost.
For example: An alarm has been set. You decide to retest before that alarm goes off. If you mark the new
test result with a and set a new alarm
, the old alarm setting will be ignored and only the new setting will sound in 2½ hours.
Options Using the Markers and Alarm
www.ascensia.co.uk | 27 |