![](/images/new-backgrounds/1138121/13812147x1.webp)
runnIng a ConTrol TesT:
There are times when you will want to do a quality control test so you know that your system is working properly. You may also want to do a control test to check the way you do your test. Simply follow these steps:
Push Out Test Strip
1.Hold the meter comfortably in one hand. Firmly grasp the meter handle with the other hand (shown here). Now, just “Pull and
NOTE: After the meter handle is pushed in, the release button is UP, a test strip is pushed out, and a series of “apply blood” prompts appears. The meter is now ready to run a control test.
2.Squeeze a small drop of
Breeze control solution onto a nonabsorbent surface (such as a clean piece of wax paper). Do not apply control solution to the test strip directly from the bottle.
NOTE: The control solution contains a red dye and may stain.
0 Bayer Customer Service: