PRO MIXER DX1000

Fig. 10.3: Insert send/return plug

11. CROSSFADER ADJUSTMENT

On the main motherboard you can find two potentiometers, which you can adjust with a little screwdriver. These potentiometers are identified as OVERLAP and SLOPE. You can unscrew the bottom of your mixer to reach the main motherboard.

+Please be aware that the BEHRINGER warranty becomes discretionary when you start disas- sembling your DX1000! Don’t even think of it, if you make much of your warranty privileges. Sorry, but we have to mention this.

11.1 Overlap

With the OVERLAP potentiometer (VR43) you can adjust the increase or decrease in dB, which is conducted when the crossfader is located in the middle position. Ex works this value is adjusted at -3 dB and should not be modified. This guarantees a constant volume across the entire fader path.

11.2 Slope

With the SLOPE potentiometer (VR44) you can adjust the fade over process of the both channels. Dependent on the setting of the SLOPE potentiometer there are the following volume curves:

11.CROSSFADER ADJUSTMENT

19

Page 19
Image 19
Behringer DX1000 user manual Crossfader Adjustment, Overlap, Slope