EUROGRAND EG2080-RW/BK

Accept/ignore MIDI controller information

Use this function to determine how the EG2080 responds to MIDI controller data. MIDI uses a variety of controller informaiton to control sound changes (e.g. pedal status, volume, effect intensity).

Function:E7.5

Value:

On, Off

Description:

On: Controller data are sent and received (default setting)

Off: Controller data are neither sent nor received

The EG2080 only responds to the commands listed in the MIDI implementation chart if controller data are enabled (see chapter 10.5).

MIDI transposition

This function determines whether outgoing MIDI data are transposed independently of the built-in sound generator. This can be useful to play the sounds of an external sound module whose sound generator is controlled from the keyboard of the EG2080 in a different pitch than the internal sounds of the EG2080.

Function:E7.6Value:-12x12

Description:

0: No transposition of the pitch at the MIDI output (default setting)

1x12: Pitch is transposed up by the number of half-tones selected

-1x-12:

Pitch is transposed down by the number of half-tones selected

This setting has no effect on the sound generator of the EG2080!Send control panel settings (snapshot)

Use this function to transmit the current settings of the EG2080 (e.g. sounds and effects, channel volume) via the MIDI output. This type of transmission only includes system-exclusive data packages (MIDI dump).

Function:E7.7

Value:-

Description:

1)Connect the EG2080 to a computer or hardware sequencer as described in chapter 7.3.2.

2)Set the MIDI sequencer to reception-ready mode.

3)Select the function E7.7 in EDIT mode.

4)Press the +/YES button to execute the transmission.

When the transmission is complete, the display shows End.

You can send the data back to the EG2080 at a later date. To do this, use the MIDI IN jack to connect the EG2080 to the device that received the data before. As soon as you start the transmission from the MIDI sequencer, the EG2080 will automatically receive the data. Make sure that neither DEMO, EDIT or music sequencer mode is active!

Sending music sequencer data

Use this function to send music sequencer data via the MIDI output of the EG2080. This allows you to archive recorded music pieces on your music computer or hardware MIDI sequencer. This type of transmission is only for system-exclusive data packages (MIDI dump), but not for MIDI playing data.

Function:E7.8

Value:-

Description:

1)Connect the EG2080 to a computer or hardware sequencer as described in chapter 7.3.2.

2)Set the MIDI sequencer to reception-ready mode.

3)Select the function E7.8 in EDIT mode.

4)Press the +/YES button to execute the transmission.

When the transmission is complete, the display shows End.

You can send the data back to the EG2080 at a later date. To do this, use the MIDI IN jack to connect the EG2080 to the device that received the data before. As soon as you start the transmission from the MIDI sequencer, the EG2080 will automatically receive the data. Make sure that neither DEMO, EDIT or music sequencer mode is active!

7. CONNECTION TO EXTERNAL EQUIPMENT

25