EUROGRAND EG2080-RW/BK

4.CONTROL ELEMENTS AND CONNECTIONS

4.1Control panel

Fig. 4.1: Control elements of the EG2080

The control elements of the EG2080 are described below. To give you a clear overview of the control panel, its elements have been grouped in separate sections.

MAIN VOLUME: Is used to adjust the volume of the builtin loudspeakers, headphone outputs and LINE OUT 1/4" TRS jacks.

BRIGHTNESS: Varies the sound character from soft (left) to bright (right).

SPEAKERS: Switches the built-in loudspeakers on and off. The MUTE LED lights up only when the built-in loudspeakers are switched off. When you insert your headphones this will automatically switch off the built-in loudspeakers.

DEMO: Enables/disables DEMO mode.

METRONOME: Is used to start/stop the metronome click.

TRACK 1: Selects track 1 for playback or recording. The REC LED lights up when the track has been activated for recording. The PLAY LED lights up when the track has been set for playback and already contains musical data.

TRACK 2: Selects track 2 for playback or recording. The REC LED lights up when the track has been activated for recording. The PLAY LED lights up when the track has been set for playback and already contains musical data.

START/STOP: Is used to start/stop playback or recording of the music sequencer.

REC: Activates record mode.

SELECT: Selects the TEMPO parameter and menu pages for EDIT mode. The EDIT MODE LED shows in EDIT mode, the TEMPO LED in TEMPO mode.

ef: Depending on which mode you have selected with the SELECT button, these two buttons can be used to enter the tempo or to scroll through the EDIT mode menu pages.

Display: Depending on the function used, the display reads the tempo, menu numbers or parameter values.

-/NO, +/YES: Is used to raise/lower the parameter values shown in the display. Additionally, the +/YES button executes certain EDIT functions.

SOUND SELECT: These 14 buttons are used for sound selection. In DEMO mode they are used to select individual sound color demos.

REVERB: Selects one of four room effects (ROOM, HALL 1, HALL 2, STAGE) for the selected sound. An LED shows which effect is currently active. If no LED lights up, no room effect is active.

10

4. CONTROL ELEMENTSAND CONNECTIONS