EUROGRAND EG2080-RW/BK

You can only activate those tracks for playback which actually contain note information.

2)If you want to have a metronome-backed playback, press the METRONOME button to switch on the metronome.

3)Press the SELECT button in the TEMPO/EDIT MODE section until the TEMPO LED lights up, then use the two ef buttons to adjust the playback tempo.

You can play back a recording at its original tempo by pressing the two ef buttons at the same time.

4)Press the START/STOP button to play back the recording. The current meter is constantly shown in the display.

During playback the two tracks can be switched on/off at any time.

You can accompany the music sequencer playback with the currently selected sound.

TIP: If the right-hand part has been recorded on track 2 and the left-hand part on track 1, you can switch off either of the tracks and practice its part live during playback. The volume of the muted track is adjustable. If necessary you can play it back in the background at low volume for support (see chapter 6.5.5).

5) To stop the playback, press the START/STOP button again.

6.5.4 Repeating musical passages for practicing

The following section describes how to play back a specific passage of a recorded music piece repeatedly. This function is ideal for practicing a specific difficult passage recorded by your piano teacher.

To make the best use of this function, the left and right-hand parts should be recorded separately on tracks 1 and 2. In this case, you can play back one part only with the music sequencer, while you practice the other part.

1)Select the track to be played back, so that the PLAY LED above the corresponding TRACK button lights up.

.

The volume of a muted track is adjustable (see chapter 6.5.5).

2)Press the START/STOP button to play back the selected track.

3)Press the SELECT button in the TEMPO/EDIT MODE section when the playback has reached the point from which you want to start repeating a passage.

The display reads:

A-: Starting point of the loop is set.

4)Press the SELECT button again when the playback reaches the point where you want to end the repetition of a passage.

The display reads:

A-b: Ending point of the loop is set.

The musical passage is now repeated continuously, so that you can practice it to perfection.

5)When you want to stop practicing, press the START/STOP button again to stop the playback.

Press the SELECT button again to quit repetition mode.

The passage marked as a loop for repetition is automatically erased when you quit music sequencer mode.

6.5.5 Setting the volume of muted tracks

This function allows you to set the volume of muted tracks.

Please enter EDIT mode (see chapter 6.1) and select the following function.

18

6. ADVANCED OPERATION