4Start
Remove your television carefully from its box. You can keep the packaging of your television to use in future.
Contents of the box Power cable Remote control
2 batteries
Note: Scart, HDMI, VGA and PHONO cables are not supplied with the device.
4.1-Aerial connection
1.Insert the power cable into the power supply input located on the back panel of the LCD TV.
2.Insert the power cable plug supplied with the device into the mains socket.
OR |
Not 1: Your TV will switch to the STANDBY mode in five minutes if there is no broadcast signal from the aerial.
Note 2: Your TV is equipped to operate with TV buttons in case your remote is broken or the batteries are exhausted.
3.To power on your television, press any numerical key or PR+ or PR- keys on the remote control.
For this process, you can also use the buttons on your TV. The picture will appear on the screen after a short while.
Note: If you are not going to use your television for a long time, unplug its power cable from the socket.
Initial power on and performing settings
To set up your television, read the sections on the TV controls and making the channel settings.
4.3-Batteries
Open the lid of the battery compartment and make sure that you have placed the batteries in the correct direction. For this remote control,
Do not throw your old batteries into the fire, discard them in a dedicated waste area for this purpose.
Do not mix used batteries with new ones or different types of batteries together.
The performance of the remote control will be reduced at a distance of 8 meters from or at an angle of 30 degrees beyond the centre of the TV.
7
