6Performing the initial power-on settings
6.1-TV controls
6.1.1-Temporary on/off (STAND-BY)
When you press the red STAND- BY button located on the upper left hand side of your remote control while your television is switched on, the sound and the picture will go off. In the
power indicator of your television will glow brighter. To switch your television back on, either press any numeric button or PR+/PR- buttons.
Caution! If you are not going to use your television for a long time, unplug its power cable from the socket.
6.1.2-Channel Selection
You may select whichever program number you would like by pressing
the PR+/PR- buttons located on your television and your remote control. To select the programs that are above 9, you can use
the Numerical buttons. You may enter the number of the program you would like to select using the numerical buttons. For example, to switch to the program number
12, press respectively the numeric buttons 1 and 2 on your remote
control. You can perform the program selection also from the Program Table.
6.1.3-Digital TV, Analog TV and AV Mode Selection
Press the AV button on your remote control. SOURCE menu will be
displayed. Select DIGITAL TV, ANALOG TV or desired AV mode from the Source menu with Up/
Down movement buttons and
confirm with OK button so that your television will switch to the source
you have selected.
6.1.4-Performing the Volume setting
You can adjust the volume of your television by using the VOL+/VOL- buttons on your remote control.
6.1.5-Temporary sound mute (MUTE)
To temporarily mute the sound of your television, press the MUTE
button on your remote control. In that case, MUTE symbol will appear on the screen. When you press the same button a second
time, the sound will be restored. If you press the VOL+ button while in the Mute mode, the sound level is increased and the Mute function is aborted.
6.1.6-Returning to Selected Program (SWAP)
Allows you to switch between the current program you watch and the last selected program. For example, if you change the channel
to Program 11 while you were watching Program 1, press SWAP button to switch back to Program 1. Press SWAP button to switch back to Program 11 again.
6.1.7-Main Menu
Press the MENU button. The Menu including all the setting menus will appear on the screen. Navigate
through the Menu titles with the
Up/Down movement buttons and
press the OK button to select the desired menu. If you want to exit the menu in any step, just press the EXIT
button. Press BACK or MENU buttons to return to the previous Menu while you are in a sub menu.
MAIN MENU
SOUND
PICTURE
PROGRAM TABLE
SETUP
FEATURES
SELECT 
EXIT
10
