Operating Instructions
Jet Cool Operation
Press the Start/Stop button.
1 The unit will respond with a beep.
Press the Jet Cool button to operate
2 the speed cooling mode and the unit will operate in super high fan speed on cooling mode for 30 minutes.
For this operation P0 appears on the display. (Plasma model only)
To cancel the Jet Cool mode, press the Jet Cool button or
3 the fan speed button or the room temperature setting button again and the unit will operate in high fan speed on cooling mode.
or 
or
NOTICE
o During the JET COOL function at any moment, the A/C starts to blow the cool air at extremely high speed for 30 minutes setting the room temp. automatically to 18°C. It is especially used to cool the room temp. in the shortest time in a hot summer.
In heat pump mode or neuro fuzzy mode, however, the JET COOL function is not available.
o In order to return to the normal cooling mode from the JET COOL mode, you just press either the operation mode selection button, airflow volume selection or temp. setting button or the JET COOL button again.
