Operating Instructions
Heating Operation(Heat pump model only)
1The unit will respond with a beep.Press the Start/Stop button.
2Operation, press the Operation Mode Selection button.Open the door on the remote control. To select Heating
Each time the button is pressed, the operation mode is shifted in the direction of the arrow.
Cooling | Auto | Healthy | Heating |
|
| Dehumidification | (Heat pump model only) |
Close the door on the remote control.
3 Set the temperature higher than the room temperature. The temperature can be set within a range of 16°C~30°C in 1°C increments.
ON | To raise the temperature |
|
To lower the temperature
Set the fan speed again with the door of the
4 remote control still closed. You can select the fan speed in four
Natural wind by the CHAOS logic
o For more fresh feeling than other fan speed, press the Indoor Fan Speed Selector and set to CHAOS mode. In this mode, the wind blows like natural breeze by automatically changing fan speed according to the CHAOS logic.
ENGLISH
Owner’s Manual 13
