Operating Instructions
Vertical Airflow Direction Control
The up/down airflow (Vertical Airflow) can be adjusted by using the remote control.
1Press the Start/Stop button to start the unit.
Press Chaos Swing button and the louvers will
2swing up and down. Press the Chaos Swing button again to set the horizontal louver at the
desired airflow direction.
Auto-Clean
NOTICE
❏If you press the CHAOS swing button, at first 5 cycles, the horizontal louver will swing up and down at maximum angle. Then, the vertical airflow direction is changed automatically based on the CHAOS algorithm to distribute the air in the room evenly and at the same time to make the human body feel most comportable, as if enjoying a natural breeze.
o Always use the remote control to adjust the up/down airflow direction. Manually moving the vertical airflow direction louver by hand, could damage the air conditioner.
o When the unit is shut off, the up/down airflow direction louver will close the air outlet vent of the system.
To adjust left/right(Horizontal Airflow) direction
Caution : Ensure that the
unit is turned off before adjusting the horizontal airflow direction control. Carefully open vertical louver to allow access to the horizontal airflow direction. Adjust the left/right airflow direction by hand.
AUTO CLEAN
NOTICE
1Whenever you press the Auto Clean button, Auto Clean Function will be reserved and cancelled.
2Auto Clean function works before and after cooling or dehumidification mode. For details, refer to the below points.
3When the unit is started after the reservation of Auto Clean ,the Cool Start function operates and indoor Fan is started after 20 seconds.
4When you press Start/Stop button to turn off the unit after the you have reserved Auto Clean function, the
For Cooling only model, it lasts for 30 minutes for Heat pump model, for 16 minutes.
5If you press the auto clean button again during the product operation, Auto Clean function will be cancelled.
For this operation C0 appears on the display. (Plasma model only)
oThis function is to remove unpleasant smells from mold and other bacteria in the
Horizontal Airflow Direction Control (Optional)
The left/right(Horizontal Airflow) can be adjusted by using the remote control. Press the Start/Stop button to start the unit.
Open the door on the remote control. Press the Airflow Direction Start/Stop button and the louvers will swing left and right. Press the Horizontal Airflow Direction Control Button again to set the vertical louver at the desired airflow direction.