Operating Instructions
Auto Changeover Operation(Optional)
1The unit will respond with a beep.Press the Start/Stop button.
2 | Open the door on the remote control. To select Auto Changeover |
Operation, press the Operation Mode Selection button. |
Each time the button is pressed, the operation mode is shifted in the direction of the arrow.
Cooling | Auto | Healthy | Heating |
| changeover | Dehumidification | (Heat pump model only) |
3 | Close the door on the remote control. Set the temperature |
lower than the room temperature. The temperature can be | |
| set within a range of 18°C~30°C in 1°C increments. |
ON | To raise the temperature |
| |
| To lower the temperature |
4 | Set the fan speed again with the door |
of the remote control still closed. You |
can select the fan speed in four steps- low, medium, high and CHAOS.
Each time the button is pressed, the fan speed mode is shifted.
During Auto changeover Operation:
The air conditioner changes the operation mode automatically to keep indoor temperature. When room temperature vary over ±2°C with respect to setting temperature, air conditioner keeps the room temperature in ±2°C with respect to setting temperature by auto changeover mode.
ENGLISH
Owner’s Manual 11
