Operating Instructions
Auto Operation (Optional)
1The unit will respond with a beep.Press the Start/Stop button.
ON
During Auto Operation:
2Operation, press the Operation Mode Selection button.
Each time the button is pressed, the operation mode is shifted in the direction of the arrow.Open the door on the remote control. To select Auto
Cooling | Auto | Healthy | Heating |
|
| Dehumidification | (Heat pump model only) |
3electronic controls based on the actual room temperature. If you want to change the set temperature, press the Room Temperature Setting buttons. The cooler or warmer you feel,
the more times (up to two times) you should press the button. The set temperature will be changed automatically.The temperature and fan speed are automatically set by the
To raise the temperature
To lower the temperature
For this operation A 1 appears on the display (Cooling plasma model only)
o You cannot switch the indoor fan speed. It has already been set by the Fuzzy rule.
o If the system is not operating as desired, manually switch to another mode. The system will not automatically switch from the cooling mode to the heating mode, or from heating mode to cooling mode, it must be done by manually resetting.
oDuring Auto Operation, pressing the chaos swing button makes the horizontal louvers swing up and down automatically. If you want to stop
