Canon L290 RECíDINMEMORY, Cancelled, Selectpolrejct, Subaddtxreject, Tx/Rxno, Troubleshooting

Messsage Error Code Cause Action

RECíDINMEMORY

SELECTPOLREJCT

SUBADDTXREJECT

CANCELLED

—	The unit received the fax in	Load paper in the multi-purpose tray
	memory because paper or	(￿p. 2-16), replace the toner
	toner ran out, or a paper	cartridge (￿p. 12-7), or clear the
	jam occurred during	paper jam (￿p. 13-3).
	reception.
#082	You attempted to poll a fax	Contact the other party to check their
	machine with a subaddress,	settings. If their fax machine does not
	but the other party has not	support polling with a subaddress,
	set a subaddress or their fax	delete the subaddress you have
	machine does not support	registered (￿pp. 6-3, 6-8, 9-10).
	polling with a subaddress.
#080	You attempted to send a	Contact the other party to check their
	document with a	settings. If their fax machine does not
	subaddress, but the other	support reception with a subaddress,
	party’s fax machine does	delete the subaddress you have
	not support reception with	registered (￿pp. 6-3, 6-8).
	a subaddress.

TX/RXNO.

toggl(ThreeMEMORYSCANNITX/RX.N)messagesFULLGO.P.

—You pressed Stop to cancel a transaction.

—The number shown (nnnn) is a unique identification number assigned to the document you are sending or receiving.

—

This number appears in reports so you can identify transactions. Write the number down if you will need it later.

—The unit is sending a document and its memory is full.

The unit continues to send the document as memory becomes available.

13-12Troubleshooting Chapter 13