Canon L240, L290 manual One-touch speed dialling, Coded speed dialling, Regular dialling

7 Enter up to 125 fax numbers you want to send

to using any of the following methods:
❏ One-touch speed dialling:		Ex:
	Press the one-touch speed dialling
	button(s) you want.
❏	Coded speed dialling:
	Press Coded Dial, then use the numeric	Ex:
	buttons to enter the two-digit code you
	want. Repeat for other codes.	Ex:
	• Be sure to press Coded Dial before
	each code.
❏	Regular dialling:
	Use the numeric buttons to enter the fax	Ex:
	number you want, then press Set.
	• You can only enter one fax number
	this way.

• If you enter the wrong destination, press Clear, then enter the correct destination.

•When you have entered multiple fax numbers, use ▼ or ▲ to scroll through the

Note numbers to review the destinations.

8Press Start/Copy to begin scanning the document into the FAX’s memory.

•When the preset time is reached, the FAX sends the document to the destination(s) you specified in step 7.

• You can register up to 20 different delayed sending operations.

•If the FAX’s memory becomes full while scanning your document, MEMORY FULL

Note	will appear in the LCD. If this happens, you will not be able to send the document at
	a preset time. Remove the remainder of the document from the ADF (you may need
	to open the operation panel to do so).

•Since the FAX is multitasking, you can perform other tasks even when your FAX is set for delayed sending.

Sending Faxes

Chapter 7 Sending Faxes 7-15