Canon L290, L240 manual Manual Sending Via the Handset

3Press Start/Copy to begin scanning for sending, or if you used speed dialling, wait a few seconds for the FAX to begin scanning automatically.

•If you do not want the FAX to begin scanning automatically after a few seconds, disable the TIME OUT setting (￿p. 14-6).

•To cancel sending once dialling has started, press Stop then T (￿p. 7-8).

•If the number you are calling is busy, the FAX redials the number automatically after a few minutes (￿p. 7-9).

• You can register up to 20 different sending operations for memory sending.

•The document is automatically deleted from memory after sending. This occurs even

Note if an error prevents complete transmission of the document.

Manual Sending Via the Handset

Manual sending via the handset allows you to talk to the other party before sending a document. This method is useful if the other party must manually activate their fax machine to receive a fax.

For this mode, you need to connect the optional handset or a telephone to your FAX (￿p. 2-6).

Note

Follow this procedure to send a document using manual sending via the handset:

1Make sure you have connected the optional handset or a telephone to the FAX (￿p. 2-6).

2 Load the document, face down in the ADF
	Ex:
(￿p. 4-3).
• To adjust the resolution and contrast,		(Currently used memory)
see pp. 7-2, 7-3.
		(Standby to scan)

3Press Hook.

•You can also lift the handset instead of pressing Hook.

7-6 Sending Faxes Chapter 7