Canon L290 Darkerinsi, Scancontrst, Keypad, USER SETTINGS Menu, SettingDATE&TIME, 1/2/3, Uchtone

USER SETTINGS Menu

For details on accessing the settings below, see p. 14-3.

he selectable settings and the default settings vary depending on the country where you have purchased the FAX. The values shown here are average values.

SettingDATE&TIME		Description	Sub- ettings
	TELPHONE#	Sets the current date and time ( p. 3-6).
		Enters the fax/telephone number you want to appear at the	ñ
UNITERMINALNAM		top of each fax page you send (￿p. 3-6).
		Enters the name or company name you want to appear at
TX	ID	the top of each fax page you send (￿p. 3-6).
		Enables/disables printing of the sender information
	OSITION	(￿p. 3-5).		FF
		Selects whether the sender information is positioned	OUTSIDE
	ELEPHONE#MARK	inside or outside the image area (￿p. 3-5).	DARKERINSI			IMAGE
SCANCONTRST		Selects the prefix for the unit number (￿p. 3-5).	TELFX
OFFHOOKALAM		Selects the scanning contrast (￿p. 7-3).	LIGHTESTANDARD
		Enables/disables the off hook alarm that alerts you that
VOLUMECONTVOLUMER		the handset is not seated properly in its cradle.	OFF
	CALLING	Sets the volume of the FAX sounds.	ñ
		Selects the ring volume when the FAX detects a voice	1/2/3
	KEYPAD	call.
	RM	Selects the keypad touch beep volume.
	INEMONITORVOL	Selects the error alarm volume.
RX	LEVEL	Selects the line monitor volume (sound during dialling).	0(off)/1/2/3
TELLINEYPE		Selects the ring type for incoming calls.	STAHIGHDARD
				UCHTONE
		Selects the telephone line type setting for your FAX
R-KEYSTTING		( p. 3-8).	ROARYPULSE
					N
		Enables dialling through a switchboard.	PBX
		If you select PBX, you can select additional sub-settings
		(￿p. 3-9).

14-4 Summary of Settings Chapter 14