Canon L290, L240 manual Registering Coded Speed Dialling, Press Data Registration

Registering Coded Speed Dialling

By registering a fax/telephone number under a coded speed dialling code, you can simplify dialling of that number to pressing Coded Dial and entering the registered two-digit code.

When you register coded speed dialling, you will:

–assign one of the 100 codes for the fax/telephone number you want to register.

–register the fax/telephone number under that coded speed dialling code.

–register a name for the coded speed dialling code. This name appears in speed dialling lists, in reports, and at the top of the recipient’s fax if you use memory sending (￿p. 7-5).

–set the transmission type for the fax number you have registered. You can set a subaddress and/or password if the other party’s fax machine requires these settings.

Follow this procedure to register coded speed dialling:

1Open the one-touch speed dial panel.

2 Press Data Registration.

3 Use ▼ or ▲ to select TELREGISTRATION.

4 Press Set.

5 Use ▼ or ▲ to select CODEDSPEEDDIAL.

6Press Set.

7Use ▼ or ▲ to select the coded speed dialling code (00to 99) under which you want to register the fax/telephone number.

•Alternatively, press Coded Dial and use the numeric buttons to enter the code.

•If a coded speed dialling code has already been registered, the number registered under that code appears.

•If a group is already registered under a coded speed dialling code, GROUPDIAL appears.

Ex:

Ex:

6-8 Speed Dialling Chapter 6