Canon L290 LCD Messages, AUTOMesssageREDIAL, Busy/Nosignal, 13-8, Troubleshooting, Error Code

LCD Messages

The following messages are displayed in the LCD when the FAX is performing a task, or when it encounters an error. The error code appears in the ACTIVITY REPORT (￿p. 11-3).

AUTOMesssageREDIAL	Error Code	Cause
	—	The unit is waiting to redial
BUSY/NOSIGNAL		the other party’s fax
		number because the line
		was busy or the other party
		did not answer when you
		tried to send the document.
	#018	The fax/telephone number
		you dialled is busy.
		The fax number dialled
		was incorrect.
		The other party’s fax
		machine is not working.
		The other party is not using
		a G3 fax machine.
		The telephone line type
		setting on your unit is
		incorrect.
		The receiving fax machine
		did not answer within
		55 seconds (after all
		automatic redialling
		attempts).
CHANGECARTRIDGE
	—	The toner inside the toner
		cartridge may be unevenly
		distributed.
		The toner cartridge is
		empty.

Action

Wait for the unit to automatically redial the fax number (￿p. 7-9).

Try sending the document at a later time.

Check the fax number and dial again.

Contact the other party and have them check their fax machine.

Contact the other party to check that they are using a G3 fax machine.

Set your unit for your telephone line type (￿p. 3-8).

Contact the other party and have them check their fax machine. You can try to send the document using manual sending via the handset (￿p. 7-6). For an overseas call, add pauses to the registered number (￿p. 9-2).

Redistribute the toner inside the toner cartridge (￿p. 12-7). If the message remains, replace the toner cartridge ( p. 12-7).

Replace the toner cartridge (￿p. 12-7).

13-8 Troubleshooting Chapter 13